Jeremy Fish's Bison Van Vinyl Figure: Care and Display Tips
By Shop Outer Limits Studio & Gallery | Published: 2026-11-03
Category: Tips & Care
Keep Jeremy Fish's Bison Van vinyl figure looking sharp with a simple dusting, handling, and display routine that protects the flocked head and textured body.
Quick answer
Dust Jeremy Fish's Bison Van vinyl figure every two to four weeks with a soft brush and keep it out of direct sun and heat. Handle it by the base or flat body panels, not the flocked head, and display it where it won't be knocked over.
Why the flocked head needs a gentler routine
The Bison Van has a textured body and a flocked head, which means two surfaces that collect dust differently. Flocking is a short, velvety fiber coating, so it traps fine dust and can mat down if you rub it. The textured body has recessed areas where dust settles and is harder to wipe away.
That is why a single cloth wiped over the whole figure is a mistake. You need a soft brush for the flocked head and a separate method for the body, and you should never use water or cleaning sprays on either surface.
Display spots that protect the finish
Vinyl can soften and warp in sustained heat, and UV light can fade painted artwork over time. Keep the Bison Van away from radiators, sunny windowsills, and the top of electronics that run warm. A shelf or cabinet with stable room temperature is safer than a garage or attic.
The figure stretches 9 inches across, so give it enough clearance on all sides. A crowded shelf invites accidental knocks, and the flocked head is the most vulnerable part if the figure tips over.
Step-by-step care and display routine
- Set up a stable display spot: Choose a shelf or cabinet away from direct sun, heat sources, and heavy foot traffic. Check that the surface is level and wide enough for the 9-inch span so the figure cannot tip. If the spot gets direct sun for more than an hour a day, move it.
- Dust the flocked head with a soft brush: Use a clean, dry soft brush or makeup brush and sweep in one direction with light pressure. Do not rub back and forth or press hard, because flocking can flatten and lose its texture. Keep a separate brush just for the flocked head so you never transfer grit from the body.
- Clean the textured body without liquid: Brush dust out of the recessed areas with the same soft brush or a dry microfiber cloth. Never use water, alcohol, or household cleaners, which can damage paint and flocking. If dust clings, use a dry brush first; only dampen the cloth slightly if absolutely necessary, and avoid the flocked head.
- Handle by the base or flat panels: Lift the figure with both hands under the base or on the flat sides of the van. Avoid gripping the flocked head or the artwork on the sides and back, since skin oils and pressure can leave marks. Wash and dry your hands before handling to reduce oil transfer.
- Do a monthly condition check: Look for dust buildup, fading, or any loose flocking. Address dust promptly, and rotate the figure slightly if one side faces light more than another. If you see fading or sticky residue, move the figure out of heat and sun immediately.
Product facts that affect care
- Jeremy Fish's Bison Van Vinyl Figure: The Bison Van stretches 9 inches across and has a textured body plus a flocked head. Its wide footprint needs a stable, spacious display spot, and the two surface types require different dusting tools.
Jeremy Fish's Bison Van Vinyl Figure
